• XOL159 GLACIER PLUS WHITE

    Product Overview:
    XOLB-159 Plus White has a soft, creamy consistency that is very easy to print, but also has very high opacity. It is excellent for
    printing on most substrates, such as 50/50 cotton/poly blends, 100% cotton and fleece. Plus White is soft, creamy and easy to
    print. It has excellent opacity, good flash times and that incredible "whiteness." It also holds dot and fine detail that puts its rivals
    to shame. It exhibits excellent low-bleed qualities.
    Printing:
    Screen meshes in the range of 83-160 TPI (32-62 TPcm) are recommended for best opacity. Will print through up to a 305 TPI (120
    TPcm) with excellent opacity. Screens of 25 n/cm or higher are strongly recommended. If using lower tension screens adjust off
    contact accordingly. Use just enough squeegee pressure to deposit the ink on the surface of the shirt. This enhances opacity and
    helps ensure a good cure. Try not to drive the ink into the fabric. Squeegees in the 70 durometer range, with a sharp edge work
    well.
    Stencil:
    Use any direct emulsion or capillary film.
    Substrates:
    XOLB-159 Plus White is designed to provide maximum opacity on dark fabrics, 100% cotton or cotton/poly blends. It has good
    "low-bleed" qualities.
    Modifiers:
    XOLB-159 Plus White is ready to use. Modification is not necessary unless you're trying to achieve a special effect or use. Any
    extenders will affect opacity. XOLB-159 Plus White has excellent shelf life and with cool storage will maintain its creamy
    consistency.
    Flashing:
    Depending on your flash unit, "Plus White" will flash in 3 seconds when at 10 watts per sq. in/heating area (per sq. 2.54cm/heating
    area) or in 4-5 seconds when at 6-7 watts per sq. in. /heating area (per sq. 2.54cm/heating area).
    Curing:
    Cure at 325?F (162?C) over a 60-90 second period depending on oven type and thickness of ink deposit. A thicker deposit will take
    longer to cure as the heat must penetrate through the entire ink layer.
    Cleanup:
    Use any of the commercially available products for the cleanup of plastisol inks.
    Environmentally Friendly:
    QCM Plastisol Ink contains no leaded pigments and, when properly disposed of, has no environmental impact. Use a screen wash
    for plastisols for cleanup. Scrape screens carefully and store ink for reuse. Minimize unusable scrap ink by segregating ink by color.

    Brand:
    Type:
    PLASTISOL INK
    Size:
    1 Gallon
    SKU:
    XOLB-159-1G
  • $92.88

  • Share this product